LW 1300 E

The LW 1300 E is designed for large industrial applications and is therefore a favorite compressor for breathing air requirements.

Low speed ensured continuous operation, long service intervals and reduced maintenance costs. The compressor unit comes fully wired with star/delta start system and includes 3x 2.3 litre breathing air filter console for wall mounting.

The 4-stage compressor block is mounted on a painted steel frame and allows a working pressure of max. 420 bar (optional). The drive motor is connected to the compressor by a rubber coupling.

Specifications

• Electro motor (Standard: 400V, 3 phase, 50Hz)

• Painted steel frame (RAL 7004)

• Inclusive a remote control box for wall mounting

• Main-, Start/Stop- and condensate test buttons, as well as emergency stop switch

• Hour counter

• Automatic condensate drain

• Automatic stop at final pressure

• Oil pressure gauge

• Intermediate pressure gauges

• Oil pressure monitoring c/w auto shut down

• High pressure outlet with 1500 mm hose

• Pressure maintaining and non return valve

• All pistons c/w steel piston rings

• Low pressure oil pump and filter

• Oil- / Water separators in stainless steel

• Safety valves after each stage

• 4 concentric suction/pressure valves

• Filling pressure of your choice (200 or 300 bar)

• Inclusive 3 x 2.3 l filter console for wall mounting

• Connections to your choice
  (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT)

• Breathing air purification an accordance to EN 12021

Options

• Auto start system

• Oil temperature display with auto shut down

• Cylinder head temperature monitoring with auto shut down

• 0.8 ltr. Prefilter (Enlarged the lifetime of the filter by approx. 5 hours)

• Puracon filter monitoring (Auto shut down also available)

• ECC control in remote control box

• Power cable and plug

• Block heating device

• 420 bar Version

• Special voltages / frequencies on request

Technical Data