The LW 450 D Basic is ideal for use on a remote island, a safari boat or in an autonomous truck.
This 450 litre compressor is equipped with a hatz diesel motor, 12 volt control, automatic start, automatic condensate drain and an integrated filling unit with four hoses and filling valves.
The Basic version includes an integrated filling device c/w four filling hoses and filling valves.
Specifications
Hatz 10kW diesel engine c/w hand start
Original Hatz diesel tank
Wet painted steel housing (RAL 7004)
Manuel condensate drain
Automatic idle speed selector when end pressure is reached (compressor switches to full speed)
4x Filling hose and filling valve
Pressure maintaining and non-return valve
All pistons c/w steel piston rings
Low pressure oil pump
Oil- / water separators after each stage
Safety valves after each stage
3x concentric suction/pressure valves
Filling pressure to your choice (200 or 300 bar)
Connections to your choice
(DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT)Breathing air purification an accordance to EN 12021
Options
200 and 300 bar parallel filling pressures
Oil pressure gauge
Intermediate pressure gauges
Hour counter
Oil pressure monitoring c/w auto shut down
0.8 ltr. Prefilter (Enlarged the lifetime of the filter by approx. 5 hours)
Automatic condensate drain
Additional high pressure outlet
Technical Data
LW 450 D Basic | |
---|---|
Type: | Air cooled piston compressor |
Capacity [l/min] / [Nm³/h] / [cfm]: | 450 / 27.0 / 15.9 |
Max. Pressure [bar]: | 350 |
RPM [1/min]: | 1100 |
No of cylinders / No of stages: | 3 / 3 |
Prime mover type: | Diesel engine, hand start |
Drive power [kW]: | 10.0 |
Cooling air requirement [m³/h]: | 3300 |
Lubrication type: | Oil pump + Splash oil |
Oil capacity [l] / Oil pressure [bar]: | 2.2 / 2.2 (+/- 0.5) |
Operating temperature [°C]: | +5°C to +45°C |
Filter capacity [m³ at +20°C]: | 750 (approx. 28 h) |
Dimensions W x D x H [mm]: | 1270 x 740 x 1000 |
Weight [kg]: | 400 |
Noise level (measured at 1 m) [dB]: | 95 |